About this deal
Skills and qualifications to be a Water Blaster technician include the ability to conduct routine and required maintenance on the unit and all peripherals . Including industrial vacuuming equipment and the disposal of hazardous and non-hazardous materials. Watex built the first hydroblaster in 1990 The main difference between a high pressure cleaner and water blaster is the way pressure is achieved. Another major difference is the pressure they can provide Personal protective equipment is essential, including a full face shield, hard hat, rain suit, rubber boots with steel toes and metatarsal guards, waterproof gloves and hearing protection. And setting up and inspecting the water blaster before each use. Hydro Jetting Equipment technician must have specialized training to operate the machine safely. As a narrow nozzle is used in hydro blaster, it provides a better cleaning performance. Water blaster requires a lot of practice and a proper technique needs to be followed. Hydro blaser can cause some serious harm due to the higher pressure of water. The operator needs to wear PPE for safety protection.
One of the major differences between Waterblaster and other cleaning abrasives (such as Silica Sand and Coal) is the ability to contain, capture, filter and reuse the water.Deadman switches/triggers must never be taped, tied, or otherwise altered so the equipment stays in the “on” position. If the lance is dropped it will whip about wildly, causing serious injuries.
Aussie Made– Our Monsoon series of cold water blasters are made in-house at our Castle Hill facility by a dedicated team that are passionate about quality.Due to less water pressure, high pressure cleaner is easy to handle and maintain. On the other hand, water blasters require experience and more professional operator , and a single error can cause damage or injury.
Water blaster machine is employed for the removal of tough stains, paint, and chemicals. It is used for industrial cleaning. Handling water blaster machine requires experience, otherwise, wrong move can damage the surface or object which is being cleaned or may injure the operator . What is the difference between water blast and high pressure cleaner ? Hydro Blasting is efficient and effective because of the high pressure and flow velocity. Whatever your pressure and flow requirements are, PressureJet's Hydro Blasting System can meet them. Our UHP water blasting system can deliver pressure up to 40,000psi in an efficient and environmentally friendly methods.
Single & three phase professional cold water blasters (Monsoon series)
Hydroblaster has the ability to be five times faster than sand blasting equipment. It also obviously reduces clean-up since there is no media collection and disposal. The result is a significant reduction of the time to finish the same project. High pressure cleaner can’t be used on every surface, while due to high pressure. Water blast can be used on every surface from thin surface to hard paint . In general, high pressure cleaner and hydro blaster run driven by either electric or diesel engine . Along with this, both of them have a water pump, nozzle , wands, and hoses. The nozzle is used to push the water at high pressure. Hydroblasting is the method, by which, a high pressure stream of water (450 bar or more up to 1400 bar) is used to remove Old Paint, Rust, Rubber, Chemicals or other heavy build up without causing damage to the surface below it. Abrasive injectors can convert a hydroblaster into an abrasive blaster. The injection or metering system controls the amount of abrasive pushed into the air stream. In large systems, the delivery system and injection system may be separate components.